Direct-Pure EDI Lab Water Systems with a Dispenser
The Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of the product water is above 5 MΩ·cm at 25℃, which meets or exceeds Type II water quality as defined by ASTM, CAP, CLSI and ISO 3696 / BS 3997 and also complies with the Purified Water requirements from the European and U.S. Pharmacopoeia.
Features：
- The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.
- Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.
- The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- The system is equipped with a 30-liter PE tank (upgradable to a 60-liter) and a liquid level sensor and a tank vent filter with CO2 scavenger to prevent EDI water from carbon dioxide contamination.
- The handle is 360 degree-rotatable and detachable from its support for effortless and instant dispensing with maximum flexibility.
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.
Main Applications:
- Type II Pure water can be used in many areas. Some of the typical applications are.
- Preparation of bio-reagents
- Preparation of culture media
- Preparation of solution for chemical analysis such as HPLC, ICP etc.
- For clinical analyzers
- Feed water for ultrapure water systems
- Medical device and equipment rinsing
- For serum and blood fractions
Specification：
|
Feed Water Quality |
|
| *Tap water | Municipal water, TDS <1000 ppm (2000 μS/cm) |
| Operating Temperature | 5 - 45℃ |
| Feed Water Pressure | 15 - 90 psi (1 - 6 bar) |
| Water Production Rate | |
| Type II water | 5, 10, 15 L/h at 25℃ |
| Product Water Quality | |
| Resistivity | > 5 MΩ·cm (typically 10 - 15 MΩ·cm) |
| TOC | < 30 ppb |
| Particle (> 0.2 μm) | < 1/ml （with a 0.2 μm final filter） |
| Microorganisms | < 0.1 cfu/ml （with a 0.2 μm final filter） |
| Pyrogens (endotoxins) | < 0.001 Eu/ml （with a terminal ultrafiltration cartridge） |
| Dimensions | |
| Length x Depth x Height | 30 cm × 51 cm × 48 cm |
| Net Weight (Operating Weight) | 22 - 25 kg (25 - 32 kg) |
Ordering information:
| Description | Catalog No. |
| Direct-Pure Water System, EDI 5 UV, adapted to dispenser | RD0EP05UE |
| Direct-Pure Water System, EDI 10 UV, adapted to dispenser | RD0EP10UV |
| Direct-Pure Water System, EDI 15 UV, adapted to dispenser | RD0EP15UV |
Large Direct-Pure EDI Lab Water Systems
The Large Direct-Pure EDI lab water system produces Type II water from tap water directly. Resistivity of product water is above 5 MΩ·cm (25℃) ,which meets or exceeds Type Ⅱ water quality standard defined by ASTM, CAP, CLSI and ISO 3696/BS 3997, the European and U.S. Pharmacopoeia. The System is designed for users who need 400 to 1800 liters of Type II water per day.
Features：
- The system incorporates the best in class Siemens EDI module to deliver high quality Type II water consistently at relatively lower cost.
- Automatic water quality control programs ensure EDI product water meeting or exceeding Type II water requirements.
- The fully automated control system contains pre-rinse, RO membrane fouling preventing flush, RO membrane life monitoring as well as many other programs for convenient operation.
- The pre-rinsing program starts automatically when a new RO membrane is installed so there is no need for users to set up additional cleaning procedures.
- RephiLe can provide full document support to meet users’ GMP, GLP, FDA and other certification requirements.
Main Applications:
- Type II Pure water can be used in many areas. Some of the typical applications are:
- Preparation of bio-reagents
- Preparation of culture media
- Preparation of solution for chemical analysis such as HPLC, ICP etc.
- For clinical analyzers
- Feed water for ultrapure water systems
- Medical device and equipment rinsing
- For serum and blood fractions
- For ophthalmics
Specification：
| Feed Water Requirements | |
| Tap water* | Municipal water, TDS < 1000 ppm (2000 μS/cm) |
| Operating Temperature | 5～45 ℃ |
| Feed Water Pressure | 30 - 90 psi (2 - 6 bar) |
| Product Water Flow Rate | Typically 30, 60 or 125 L/h (at 25℃) |
|
Product Water Quality |
|
| Resistivity | > 5 MΩ·cm @ 25 ℃ (typically > 10 MΩ·cm @ 25℃) |
| TOC | < 30 ppb |
| Particle (> 0.2 μm) | < 1/ml （with a 0.2 μm final filter） |
| Microorganisms | < 0.1 cfu/ml （with a 0.2 μm final filter） |
| Pyrogens (endotoxins) | < 0.001 Eu/ml （with a terminal ultrafiltration cartridge） |
| Dimensions | |
| Length x Depth x Height | 40.0 cm X 49.0 cm X 110.0 cm |
*If water hardness is greater than 1000 ppm, RephiLe suggests using an additional water softening device to protect the RO membrane in your system.
Ordering information:
| Description | Catalog No. |
| Direct-Pure Water System, EDI 30 | RD0E0300E |
| Direct-Pure Water System, EDI 60 | RD0E0600E |
| Direct-Pure Water System, EDI 125 | RD0E01H0E |
| Direct-Pure Water System, EDI 125 | RD0E02H0E |
Cartridge set is required for the water systems to function. Please contact RephiLe for detailed information.
Large Direct-Pure EDI Water System