SUPPLY laboratory equipment
SERVICE laboratary equipment
VALIDATE laboratory equipment
CALIBRATE laboratory equipment
SUPPLY consumables

LabIndia Tablet testing

Tablet Disintegration Tester

Tablet Disintegration Tester

Standard Features

  • Alpha-Numeric splash proof keyboard allows entries like sample name, sample Number/ ID number for data authentication.
  • Selectable report printout complies to GLP requirements.
  • Built-in Real Time Clock (RTC) for date, time display & authenticity of printout.
  • Error indication to trace out the problem.
  • Meets specification of USP,BP,EP, IP etc.
  • Programmable Temperature & Time.
  • Moulded, Clear acrylic water bath with illumination for better visibility.
  • Baskets are automatically lifted at the end of the test.
  • Capability for dual buffer disintegration test.
  • Audible, low water level alarm with indication on display for safety.
  • Individual temperature sensors available for individual beakers.
  • PC compatibility for data downloading.

 


 Tablet Friability Tester

Tablet Friability Tester

Standard Features

  • Advance Microcontroller based with user friendly software in dialog mode.
  • Alpha-Numeric splash proof keyboard allows entries like sample name, sample Number/ ID number for data authentication.
  • Conical shaped low evaporation recovery lids on the tablet dispenser reduces the media loss during long dissolution run
  • Selectable report printout complies to GLP requirements.
  • Built-in Real Time Clock (RTC) for date, time display & authenticity of printout.
  • Error indication to trace out the problem.
  • Meets specification of USP, BP, EP, IP etc.
  • Offers a count & time mode.
  • Automatic discharge of the sample into individual sample tray after completion of each cycle.
  • 10° tilting of drums as per USP recommendation.
  • Easy front loading system.
  • Supports friability drum & abrasion drum as well.
  • Calculation mode for friability -percentage weight-loss.
  • Balance interface for online sample weight transfer.

 


 


Tap Density Tester

Tap Density Tester

Standard Features

  • Advance Microcontroller based with user friendly software in dialog mode.
  • Alpha-Numeric splash proof keyboard allows entries like sample name, sample Number/ ID number for data authentication.
  • Selectable report printout complies to GLP requirements.
  • Built-in Real Time Clock (RTC) for date, time display & authenticity of printout.
  • Error indication to trace out the problem.
  • Gives calculated results i.e. Tapped Density, Compressibility Index, Hausner Ratio & Bulk Density.
  • Meets specification of USP, IP, ASTM etc.
  • Gives calculated results i.e. Tapped Density, Compressibility Index, Hausner Ratio & Bulk Density.
  • Two cylinder holders will hold 100ml & 250ml cylinder.
  • Balance Interface for sample weight transfer.
  • PC compatibility for data downloading.

 


 


Hardness Tester - Single Station (TH-1050M)

Hardness tester Single station TH 1050 M

Standard Features

  • Advance Micro-controller based user-friendly state-of-the-art product design with alphanumeric keyboard.
  • Single Station Automatic measurement of tablet parameters - Diameter/Length & Hardness
  • Large Non-Volatile data storage memory: 99 methods, Users Result and Validation data
  • Automatic run can be performed continuously up to 1- 99 tablets. RUN can be re-started on power failure or on System Reset with last run parameters.
  • Two Tier - a] ADMIN, and b] USER password protection for method editing and Validation.
  • Validation/Calibration protocol with verification for Hardness - 3 point Load Cell calibration with Standard weights and Diameter/Length Calibration with
  • Standard gauges.
  • GLP complaint print reports of Results, Program methods and Validation/Calibration data with built-in Parallel port printer interface.
  • Built in dual RS 232 C interface for data transfer for PC and Balance for Sample Tablet weight transfer.

Wide Measurement Range and Units :

  • Tablet Hardness » upto 500N; N, Kp, Kgf, Pounds or SC
  • Tablet Diameter/Length » upto 40 mm : inch or mm (60mm option available for bolus tablets)

Wide Measurement Range and Units :

  • Tablet Hardness upto 500N; N, Kp, Kgf, Pounds or SC Tablet Diameter/Length upto 40 mm: inch or mm (60mm option available for bolus tablets)

 


 


Hardness Tester - 12 Carousel (TH-1050S)

Hardness tester 12 Carousel TH 1050S

Standard Features

  • Advance Micro-controller based user-friendly state-of-the-art product design with Alphanumeric keyboard.
  • 12 Position Carousel for Automatic measurement of tablet parameters- Width, Thickness, Diameter/Length & Hardness.
  • The built in Sweeping blades cleans the tablet path for removal of broken pieces, debris and dust.
  • Large Non-Volatile data storage memory: 99 methods, Users Result and Validation data
  • Automatic run can be performed continuously up to 1- 99 tablets.RUN can be re-started on power failure or on System Reset with last run parameters.
  • Two Tier - a] ADMIN, and b] USER password protection for method editing and Validation.
  • Validation/Calibration protocol with verification for Hardness - 3 point Load Cell calibration with Standard weights, Width/Length/Diameter & 3 point Thickness Calibration with Standard thickness gauges.
  • GLP complaint print reports of Results, Program methods & Validation/Calibration data with built-in Parallel port printer interface.
  • Built in dual RS 232 C interface for data transfer for PC & Balance for Sample Tablet weight transfer.

Wide Measurement Range and Units :

  • Tablet Hardness up to 500N; N, Kp, Kgf, Pounds or SC
  • Tablet Diameter/Length up to 32mm; inch or mm
  • Tablet Thickness up to 18mm; inch or mm

 

 


 


Hardness Tester - 24 Point Carousel

Hardness tester 24 Point Carousel

Standard Features

  • Advance Micro-controller based user-friendly state-of-the-art product design with Alphanumeric keyboard.
  • 24 Position Carousel for Automatic measurement of tablet parameters- Width, Thickness, Length/Diameter & Hardness. It fulfills the Pharmacopeial requirement of 20 tablet testing in single run.
  • The built in Sweeping blades cleans the tablet path for removal of broken pieces, debris and dust.
  • Large Non-Volatile data storage memory: 99 methods, Users Result and Validation data
  • Automatic run can be performed continuously up to 1 - 99 tablets. RUN can be re-started on power failure or on System Reset with last run parameters.
  • Two Tier - a] ADMIN, and b] USER password protection for method editing and Validation.
  • Validation/Calibration protocol with verification for Hardness - 3 point Load Cell calibration with Standard weights, Width/Length/Diameter & 3 point
  • Thickness Calibration with Standard thickness gauges.
  • GLP complaint print reports of Results, Program methods & Validation/Calibration data with built-in Parallel port printer interface.
  • Built in dual RS 232 C interface for data transfer for PC & Balance for Sample Tablet weight transfer.

Wide Measurement Range and Units :

  • Tablet Hardness up to 500N; N, Kp, Kgf, Pounds or SC
  • Tablet Diameter / Length upto 32mm; inch or mm
  • Tablet Thickness upto 18mm; inch or mm